RANSBURG LEPS5000-05 JUNCTION,HV,NO RES,W/6 HV TUBES
The LEPS5000 High Voltage Junction Tank is a device which permits distribution of high voltage from one power supply to as many as six electrostatic rotary or gun applicators. The high voltage components are submersed in high quality transformer oil and contained in a five gallon container. For most gun systems, the junction tank is supplied with individual output resistors in series with the high voltage input. The resistor value used depends on the gun and application specifications (reference the “Parts Identification” section and your Ransburg representative). Model LEPS5000-05 is Factory Mutual listed with Aerobell 33 and Turbodisk 33 applicator systems. Model LEPS5000-05 is a direct electrical feed through device and does not incorporate series resistors.
Includes
2 70539-00 Ground Clamp Assembly
3 SSW-1064 High Voltage Cable, Unshielded (All Junction Tank Models)
4 LKIT0003 Connection Kit for SSW-1064 (Includes Items 8-11)
5 EPS-4245 High Voltage Connector (Banana Plug)
6 7296-00 High Voltage Cable Nut
7 LSMM0006-00 Bushing
8 8521-06F Nut Retaining Screw
| Input High Voltage: | 100 kVDC maximum continuous |
| Output High Voltage: | Six outputs; equal to or less than the input voltage depending on model used and output current. |
| High Voltage Cable: | Unshielded type; Ransburg part number SSW-1064 or approved equivalent. |
| Weight: | Approximately 45 lbs. |
| Size: | 12″ diameter x 16″ height |
