RANSBURG 80665-01110514 RANSFLEX AUTOMATIC APPLICATOR SB
The RansFlex is an air atomizing applicator powered by a RVC power supply.
The Cascade generates a high voltage DC charge to the electrode creating ang electrostatic field between the atomizer & the target,
One of the many features of the RansFlex applicator system is that the electrical energy which is available from the resistive charging electrode, is limited to the optimum level of safety & efficiency. The system is incapable of releasing sufficient electrical or thermal energy during normal operating conditions to cause ignition of specific hazardous material in their mo st easily ignited concentration in air.
As the applicator electrode approaches ground, applicator circuitry causes the high voltage to approach zero while the current approaches its maximum value. This performance is validated by independent test agencies that give FM US & C and ATEX EN 50 050.
Features
- Devilbiss spray technology integration into atomization.
- Independent atom and fan air for optimal adjustment.
Includes
A #0 V Series 1.2mm (80265-00, 80264-12 & 79809-00)
B #1 Non-Bleeder (80577-01)
C #1 19mm Post (80583-19)
D #1 STD Fluid Inlet Tube (80578-65)
E #0 No Fluid Hose
FF #51 Ransburg Voltage Controller-Pressure Switch Trigger -Type B Cord – 3m I/0 Cable (81000-01111)
G #4 30m Low voltage Cable (79338-15) (2)
| Environmental/Physical: | |
| Applicator Length | 273mm (10.75-inch) |
| Weight (w/Hose) | 2.3125 lbs |
| Low voltage cable 79338-XX lengths(std) | 10m, 15m, 20m, & 30m |
| Tubing Requirements: | |
| Atomizing Air | 5/16” (8mm) OD Nylon |
| Fan Air | 5/16″ (8mm) OD Nylon |
| Trigger Air | 5/32″ (4mm) OD Nylon |
| Electrical: | |
| Operating voltage | 65kV DC (-) Maximum |
| Current Output | 90 microamperes maximum |
| Paint Resistance | .1 *Use model# 76652, Test Equipment |
| Part Sprayability | Determine sprayability of part to be coated using 76652 (Test Equipment) |
| Mechanical | |
| Fluid Flow Capacity | 1000 ml/min. **reflects the max fluid vol the applicator can deliver. The max spray vol that can be effectively depends on fluid rheology, spray tech & finish quality required. |
| Wetted Parts | Stainless, polyethylene, nylon, acetal polymer |
| Operating Pressure (Air Spray) | |
| Fluid | 0-100 psi |
| Air | 0-100 psi |
| Trigger | 80-100 psi |
| Ambient Temperature | 104°F to 41°F |
| Trigger Response time | 150 msec open & close |
