EcoQuip 2 EQs Dual Line Twice the production rate
Graco’s EcoQuip EQs Dual Line features two outlets and a large pressure pot capable of blasting up to four hours with two blasters at once. Select a skid with the 120 gallon water tank for job sites without a pressurized water source. Get your project up and running quickly with this high production machine
EcoQuip™ Vapor Abrasive Blast Equipment2
The Fast, Easy, Reliable Solution for Surface Prep and Coating Removal
Includes
- Bare EcoQuip 2 EQs Dual Line System, 282960
- (2X)1.25 in Pneumatic control blast hose, 50 ft (15 m), 26A025
- (2X)1.25 in Pneumatic extension blast hose, 50 ft (15 m), 26A027
- (2X) #8 High Performance Nozzle for 1 or 1.25 in blast hose, 17J856
Redefining the Abrasive Blasting Industry with EcoQuip 2
Fast
- Quickly adjust blast pressure and media flow
- Maximum blast pressure up to 175 psi (10.3 bar) allows the operator to achieve fast removal rates
- Engineered blast circuit with minimal pressure drop
Easy
- Set up EcoQuip 2 with just five simple steps
- Fixed pot pressure eliminates setting pot pressure relative to blast pressure
- Simple, user-friendly MediaTrak screen helps you set media flow to optimal levels
Reliable
- Every unit is tested on state-of-the-art test bench before it ships
- Unmatched customer and technical support to assist with equipment needs
- Components tested to the toughest Graco standards
- Made in U.S.A
What is Vapor Abrasive Blasting?
- Vapor Abrasive blasting is similar to dry blasting, except that the blast media is moistened prior to impacting the surface and creates up to 92% less dust.
- Less Dust and Water Means Less Containment and Clean-up
- Testing conducted by a third-party agency shows that vapor abrasive blasting suppresses up to 92% of dust compared to dry blasting. Because dust is minimized, less containment may be required and media clean-up time can be reduced. Since EcoQuip 2 uses less water than slurry or other water-based technologies, pools of water aren’t left behind, and there is less need to worry about toxic runoff. The end result with EcoQuip 2 is a cleaner, better contained process.
EcoQuip 2 Works With a Variety of Abrasives
Media can be expensive, so you want a machine that uses the least amount possible to get the job done quickly while providing good control over water and media usage. EcoQuip 2 uses MediaTrak and an abrasive meter to quickly and easily set and monitor theabrasive consumption rate. MediaTraks™ user-friendly screen helps you set media flow to optimal levels for the most effective blast. It tracks the pump cycle rate and keeps a grand total so you can schedule maintenance at regular intervals to ensure you always get the best performance from EcoQuip 2.
In addition, Graco’s EcoQuip 2 handles a range of media sizes from coarse to fine (12 – 150 grit), any media heavier than water, and one that won’t rust in the tank (i.e. steel shot). Below is an example of some common media types.
