5175257 GP-9XLT BENDPAK 9,000 Lb. 4-Post / High Rise / Ext. Length / Includes Caster Kit, Drip Trays and Alu. Ramps
The GrandPrix GP-9XLT is a four-post lift that’s 24″ longer and 12″ taller than the standard-length GP-9F model. Perfect for parking high-stance and/or longer-wheelbase vehicles underneath.
Features
- BendPak’s proven legacy gives you an edge in performance, service and cost of ownership.
- Designed to be fastened to the floor or free-standing.
- Comes standard with caster kit, drip trays, mobile jack tray, aluminum approach ramps, and hardened steel tire stops.
- Boxed-steel columns are made from structural 4.75″ x 4.75″ welded steel tubing.
- Columns feature 12″ x 12″ baseplates 5/8″ thick.
- Manual dead bolt locks are reliable and safe and are machined directly into the boxed-steel columns.
- 3/4″ thick steel safety locks are spring loaded for automatic and solid engagement.
- 16 positive locking positions are spaced every 4 inches.
- Secondary slack-cable lock system assures instant back-up safety lock engagement in the event of a cable failure.
- Exterior steel sleeves with UHMV slides surround each column to ensure positive contact and containment.
- ¾” thick safety locks are securely trapped by the full-perimeter cross tube sleeves and can’t become dislodged or disengaged.
- Welded-steel runways feature utility rail for jack tray and drip trays and other accessories.
- Runways are welded and boxed for extra strength.
- Built-in flow restriction integrated into the hydraulic cylinder to prevent free-fall.
- Oversize baseplates and pull-perimeter cross tube sleeves reduce lateral movement and sway when lift is free-standing.
- Low profile runways are only 5″ high to accommodate low ride-height vehicles.
- Hardened steel safety lock linkages use 3/8″ molded carbon steel rod ends to reduce flex and twist to ensure positive locking and smooth operation.
- Precision, reinforced rod ends with spherical bearings are protective coated for corrosion resistance and are designed to provide low friction and high wear resistance.
- 5/8″ thick top caps.
- Sheave axles feature hardened steel collars and snap rings.
- Pull out tire stops on both ends of the lift that allows drive through capability.
- Stainless steel lifting cables are rated to handle over 14,000 lbs. each.
- Cable keepers assures cables remain safely secure to the sheaves.
- Pre-assembled cables simplifies installation.
- 36″ aluminum approach ramps are gusseted to eliminate flex and bending.
- Non-marring heavy-duty poly caster wheels will not damages painted floor surfaces.
- Durable powder coat finish.
- 3/4″ runway bolts provide positive attachment with increased safety factor.
- Operator controls are simple to use, well-placed and ergonomically advanced to reduce operator strain and fatigue and increase safety.
- Electric/hydraulic power system.
- Single hydraulic cylinder underneath runway.
- Optional full-length aluminum platforms can be added to easily store lawnmowers, ATVs, jet skis or motorcycles.
| Lifting Capacity* | 9,000 lbs. (4,082 kg) |
| *Max Capacity / Front Axle | 4,500 lbs. (2,041 kg) |
| *Max Capacity / Rear Axle | 4,500 lbs. (2,041 kg) |
| Rise | |
| A – Min. Runway Height: | 5″ (127 mm) |
| B – Max. Rise: | 82″ (2,083 mm) |
| C – Max. Lifting Height: | 87″ (2,210 mm) |
| Time to Full Rise: | 55 seconds |
| Outside Dimensions | |
| D – Overall Width: | 114″ (2,896 mm) |
| E – Outside Length: | 200.5″ (5,093 mm) |
| F – Overall Length: | 227″ (5,766 mm) |
| G – Height of Columns: | 99″ (2,515 mm) |
| Inside Dimensions | |
| H – Width Between Columns: | 98″ (2,489 mm) |
| I – Drive-Thru Clearance: | 86″ (2,184 mm) |
| Runways | |
| J – Runway Width: | 18.75″ (476 mm) |
| K – Length of Runways: | 189.75″ (4,820 mm) |
| L – Width Between Runways: | 37.5″ (953 mm) |
| M – Runway Centerline: | 53.75″ (1,365 mm) |
| N – Outside Edge of Runways: | 72.5″ (1,842 mm) |
| Minimum Wheelbase | |
| Rated Capacity: | 135″ (3,429 mm) |
| 75% Capacity: | 115″ (2,921 mm) |
| 50% Capacity: | 95″ (2,413 mm) |
| 25% Capacity: | 80″ (2,032 mm) |
| Locking | |
| Locking Positions: | 16 |
| Lock Spacing: | Every 4″ (102 mm) |
| Power Unit | |
| Motor: |
STANDARD: 110VAC, 50-60HZ, 1PH, 20A or OPTIONAL: 208-230VAC, 50-60HZ, 1PH, 25A
|
| Noise: | 45 dB |
| Shipping | |
| Weight: | 2,416 lbs. (1,095.9 kg) |
| Dimensions: | 190” x 22” x 35” (4,826 mm x 558 mm x 889 mm) |
