No. 5 (Part 8050-5) 1.8mm (.070″) HIGH OUTPUT
Larger surfaces, thick layers, spotted effects. SEALERS, VARNISH, POLYURETHANE, OIL BASED PAINTS, ENAMELS, EPOXY, PLASTIC, ADHESIVES, FLOOR PAVING PAINTS, LATEX , ETC.
AIRCAP SET SELECTION
The fluid nozzle 6082 and needle 8020 MUST always match exactly. Size No.4 is standard with all Fuji sprayguns. No. 3 or No. 4 can be used for
any type of fine-finishing application. The difference between the two is that the #4 allows for more fluid output. This is desirable when spraying fast drying lacquers. It allows you to spray faster and wetter to obtain better leveling of the finish. 4 additional setups are available as accessories. Generally speaking, the quality of atomization and finish reduces as you go to the larger size setups (No.5 and 6).
#5 – Perfect for when you need faster application. Always remember that once you step up to #5 or #6 you may start to see some slight texture in the finish. The #5 measures 1.8mm (.070in.). Please note* these parts will not fit the older Fuji Model SC-1. For the SC-1 spraygun
