Air cap sets
If you own the T-Model™, please check the part numbers in your user manual (5100 series). If you own the M-Model™, please check the part numbers in your user manual (7020 series). If you own the G-XPC/XPC, please check the part numbers in your user manual (8050 series). If you own an older XT or GT-X, please check the part numbers in your user manual(9001series)
Standard 1.3 mm is installed in all T-Series Spray Guns. Air cap set is perfect for most fine finishing. For T-Series Spray Gun only – does not fit older Fuji Spray guns.
- Standard 1.3 mm for all T-Series spray guns
- Perfect for most fine finishing
- High-efficiency air cap for T-Series Spray Guns only
- Not for use with older Fuji Spray guns
#3 1.3mm (0.51”) — Medium output — Similar to #2 but more coverage. Especially suitable for automotive enamels, nitrocellulose lacquer, catalyzed lacquers and latex where finer finish is required such as louver doors, trim, cabinets (see article on latex). Also good for varnishes and oil-based paints.
