CHE-4 Aluminum Nozzle Holder – Nozzle Holder with screws for hose 2-3/8″ OD
The Clemco fiber-reinforced nylon nozzle holder attaches to the end of a blast hose and holds a blast nozzle specify thread type on quote request.
Nozzle holders attach to the end of a blast hose and hold the blasting nozzle. During operation, the air pressure inside the blast hose helps hold the nozzle holder securely in place. To attach the nozzle holder, the blast hose must be cut squarely and cleanly, and the holder must be installed using the screws provided. When installing, the screws should penetrate the outer wall but not the inner wall of the blast hose.
Clemco nozzle holders are available in aluminum and fiber-reinforced nylon. Nylon nozzle holders are also available with both standard and contractor mounting threads. Contractor threads are a Clemco-exclusive design: they offer larger threads that help prevent abrasive buildup and allow for easy assembly/removal.
Model |
CHE-4 |
Fits to |
1-1/2 in. Inside Diameter (ID) x 2-3/8 in. Outside Diameter (OD) |
Size |
For 2-3/8 in OD Hose |
Typical Hose ID |
1-1/2 in |
Material |
Aluminum |
Thread Type |
Standard National Pipe Thread (NPT) |
Thread Size |
1-1/4 in |
Weight |
1 lb |
