Bullard CAB100HA Clean Air Box provides 3 stage air filtration & CO (carbon monoxide) monitoring to help satisfy OSHA Grade D Breathing Air requirements.
Features
- Durable construction withstands harsh working environments
- Polycarbonate Pelican Case
- Auto condensate drains will extend the filter element lifespan
- CO Monitor
- Automatic calibration is approx. 90 seconds with no tools required
- High-intensity 90dB alarm, remote capable w/ strobe
- Self contained
- Over 70 hrs operation time with 8 AA size batteries
- 110 VAC power cord incl.
- Visual display w/ Internal LCD & External LEDs
Specifications
- Filtration Capacity – 100cfm (4248lpm) at 110psi (7.5bar)
- Filter Efficiencies
- 1st Stage – Filters to 5 microns, 95 percent of bulk liquids, Auto drain, Filter Change Indicator
- 2nd Stage – Filters to .01 microns, 99.9998 percent efficient, Auto drain, Filter Change Indicator
- 3rd Stage – Oil vapor removal, odor & taste removal, Max. remaining oil content of .003 ppm / wt., 99.9998% efficient, Filter Change Indicator
- Filter Housing Inlet – Polycarbonate bowls, 1/2 inch (13 mm) Industrial Interchange (Hansen Compatible) male plug
- Outlets – 8 Industrial Interchange (Hansen Compatible)
- Maximum Inlet Pressure – 150 psi (10.3bar)
- Maximum Outlet Pressure – 125 psi (8.6 bar)
- Relief Valve – 125 psi (8.6bar), ASME preset
- Pressure Regulator – Adjustable, locking regulator w/ 0 to 160psi outlet gauge
- Monitor – Flow thru In line continuous operation
- Voltage – 115 VAC 10 foot cord included, or 8 AA size batteries, monitor will switch to DC automatically w/ AC power fail
- Display – Digital LCD, Accurate to +/- 1 percent full scale
- Operation Lights
- Ext. green light with normal AC operation
- Ext. red light for high CO
- Ext. amber light, steady for battery power currently in use
- Ext. amber light, flashing for low battery w/ flashing chirp
- Audible Alarm – High intensity at 90dB
- Response – 90 percent full scale in 10sec.
- Sensor – Electrochemical, CO specific
- Output Signal – Remote alarm jack w/ DC out & cover cap
- Calibration – Auto (no tools needed), Complete in 90 sec., Recommended monthly
- Warranty – 2 yrs on sensor & monitor
