5175259 XPR-12CL-LTA-192 BENDPAK 12K Capacity / Clearfloor / 192″ O.A. Height
The XPR-12CL-LTA is ALI Certified
The Automotive Lift Institute (ALI) is the golden standard of automotive lift safety. With their ANSI accreditation, ALI is the only nationally recognized institute for lift certification. An ALI Certification assures you that the automotive lift in your garage meets with the quality and safety standards developed by ALI over the last 74 years of its operation.
A lift that is ALI Certified had to meet with rigorous safety standards to determine the safety of its structural integrity, design, components, manual instruction and production facility.
Lift Carriages Strengthened to Handle Long Reach
Along with its extended reach, the XPR-12CL-LTA features extra carriage strength to counter the extra weight of the extra-long arm.
Optional column extension
BendPak can increase your overhead clearance to 192” overall height to maximize the number vehicle types you can service in this weight class.
Features
- CE Approved and Certified.
- Padded overhead safety shutoff bar
- Extended height top-beam provides greater clearance
- Single-point safety release
- Dual direct-drive hydraulic cylinders
- Dual-synchro equalization system for equal lifting
- Oversized 53” tall carriage for superior strength
- Electric / hydraulic power system
- Oversized A36 steel base plates
- Self-lubricating dura-glide UHMW polyethylene bearings
- Safety locks in each column spaced every 3”
- Automatic arm restraints
- Heavy-duty 1/2” aircraft-quality equalizer cables
- Oversized cable sheave diameter reduces cable fatigue
- Durable, rubber lift pads with stackable adapters
- 16-piece specialty adapter set includes four 6” stackable adapters, four 3” stackable adapters, four polyurethane contact pads and four frame cradle pads
- Convenient storage is included for truck and van adapters
- Triple-telescoping arms provide increased range
| Lifting Capacity* | 12,000 lbs. (5,443 kg) |
| *Max Capacity / Front Axle | 6,000 lbs. (2,722 kg) |
| *Max Capacity / Rear Axle | 6,000 lbs. (2,722 kg) |
| Rise | |
| A – Rise: | 69″ (1,753 mm) |
| B – Rise + Pad Only: | 74″ (1,880 mm) |
| C – Rise + Pad + 63 mm Adapter: | 80″ (2,032 mm) |
| D – Min. Height + Pad: | 5″ (127 mm) |
| Time to Full Rise: | 90 seconds |
| Outside Dimensions | |
| E – Height Overall: | 170″ (4,318 mm) |
| F – Width Overall: | 155″ (3,937 mm) |
| G – Outside Columns: | 144″ (3,658 mm) |
| Inside Dimensions | |
| H – Inside Columns: | 120″ (3,048 mm) |
| I – Drive-Thru Clearance: | 106″ (2,692 mm) |
| J – Floor To Overhead Switch: | 165″ (4,191 mm) |
| Arms & Pads | |
| K – Front Arm Reach: (MIN) | 37″ (940 mm) |
| K – Front Arm Reach: (MAX) | 72″ (1,829 mm) |
| L – Rear Arm Reach: (MIN) | 37″ (940 mm) |
| L – Rear Arm Reach: (MAX) | 72″ (1,829 mm) |
| Max Load Per Arm | 3,000 lbs. (1,361 kg) |
| Power Unit | |
| Motor: | 220 VAC / 60 Hz / 1 Ph |
| Noise: | 45 dB |
| Shipping | |
| Weight: | 2,724-lbs. (1,235.6 kg) |
| Dimensions: | 174” x 29” x 29” (4,419 mm x 736 mm x 736 mm) |
