35mm shaft 3/4” BSP-F inlet, 3/8” BSP-F outlet
CW SERIES 69
FEATURES:
- the preferred pump frame in the two (2) gun prep conveyor and tunnel car wash industry
- Forged brass manifold with an exclusive lifetime warranty
- Large capacity, die cast, anodized aluminum oil bath crankcase
- Over sized connecting rods for maximum life
- Heavy duty tapered roller bearing
- Solid ceramic plungers with continuously lubricated packings
- Unitized stainless steel inlet and discharge valves
- Available in “L” left handed version
SPECIFICATIONS:
- Car Wash Triplex Plunger Pump
- Maximum Volume: 12 GPM
- Maximum Discharge Pressure: 1000 PSI
- Maximum Inlet Pressure: 125 PSI
- Maximum Pump Speed: 900 RPM
- Minimum Horsepower Requirements: 8.2 bhp (12.3 hp for gasoline engines)
- Bore: 1.18″ (30mm)
- Stroke: .945″ (24mm)
- Crankcase Capacity: 50.7 oz. Nondetergent SAE 30W oil
- Maximum Fluid Temperature: 165 Degrees F.
- Inlet Port Thread: 3/4″ FPT
- Discharge Port Thread: 3/8″ FPT
- Shaft Diameter: 1.378″ (35mm)
- Dimensions: 13.0″ x 11.9″ x 7.3″
- Weight: 45 lb.
Lubrication: fill the crankcase to dot on oil gauge window per specifications with Nondetergent SAE 30W oil. Change the oil after a 40 hour break-in period, then every three (3) months or 500 hour intervals thereafter.
