The Annovi Reverberi AR SRMW24G28-EZ triplex residential plunger pump for vertical gas engine driven pressure washers flows 2.2 gallons per minute at 2,800 PSI and 3,400 RPM.
RPM: 3,400
Shaft Size: 7/8″
Max GPM: 2.4
Max PSI: 2,800
Inlet Thread: 3/4″ GHA
Discharge Thread: 22mm x 1.4M
This pump mounts directly on to the engine shaft by using a keyed hollow shaft connection system. The mounting flange provides a convenient connection to most 7/8” diameter shaft vertical gas engines in 4 – 7 HP (reference the cc to HP chart) and fits most OEM carts. This pump includes a built-in pressure control valve, downstream chemical injection system, EZ start valve and thermal relief valve. The seal system uses a high and low pressure seal.
- The “S” version has upgraded grade valves
- The pump body and head are die-cast aluminum alloy
- Pistons are driven by swash (wobble) plate mechanism
- The crankshaft is supported by an oversized ball bearing while the swash plate has a thrust bearing assembly
- Pistons are tempered stainless steel
- Pump head is forged brass
- The seal system uses a high and low pressure seal
| Max GPM | 2.4 |
| Max L/Min | 9.1 |
| Max PSI | 2800 |
| MaxBar | 173 |
| Power EBHP | 4.6 |
| Bore Dia mm | 12 |
| Motor EBHP | 12 |
| Stroke mm | 9.0 |
| Crankshaft ID Stamp | 3 |
| Inlet | 3/4″ GHA |
| Outlet | 22mmx1.4 M |
| Max Temp | 140° F |
| Weight | 7.3 |
| RPM | 3400 |
| Shaft Size | 7/8″ |
| Shaft Version | D |
| Shaft Type | Hollow |
